Product

Vertical Short Travel Applications

Shorts

GB20
GB20GB50GB50GB50GB50

Our GB Range of 2-Stop Short Travel Vertical Platform Lifts provide a good economic option for short travel applications in commercial and public buildings.

These products comprise of an open car (1100mm high) where the lower entrance travels with the car. The upper entrance is fitted to the top step or landing. Suitable for indoor or outdoor use, these platform lifts are easy to integrate into a building, as they only need a single load bearing wall and a small footprint. Whether fitted indoors or outdoors, the design of these products ensures that installation is quick and on site builders’ works are minimised. Travel is limited to 2m, due to the use of an 1100mm high car, car gate and top landing gate.

All of our GB Platform Lifts are manufactured to comply with the EC Machinery Directive 2006/42/EC.

Longer travel and multiple stop applications can be dealt with using our GP and SP Ranges.

GB20 Step Through 2-Stop Vertical Platform Lift

Our GB20 Platform Lift uses a smooth wall mounted rack and pinion drive system to move up to 360kg between floors. To simplify installation, the upper entrance is integrated into a full travel height powder-coated aluminium “climbing” wall and the pit requirement is only 80mm. The electric drive unit sits within the moving car so there is no need for a machine room. Operation is by constant pressure buttons on the platform and on both landings. Our standard models come with set platform dimensions, car and entrances supplied in powder-coated aluminium (in a variety of colours) and manually operated gates. A wide range of options for the GB20 enables user to design a more individual bespoke solution.

The GB20 is also available as an enclosed model, encompassing a full height (2000mm) door at lower level (that does NOT travel with the platform) and matching side panels to extend to the full height of the travel plus upper (1100mm) entrance.

Manufactured to comply with the EC Machinery Directive 2006/42/EC

Standard Specification


Capacity
360kg
Speed
0.10 m/s - Gentle start/stop
Travel
10m (max)
Operator Controls
At the drive as large area button as well as at both stops as stationary wall buttons
Platform Size (width x depth)
900mm x 1400mm, 1000mm x 1400mm or 1100mm x 1400mm
Other sizes are available upon request
Tracks
Shaped tube frame profile with circular toothed bar
Drive
Rack and pinion
Power
230V, 50Hz, 13Amp
Colour
All RAL colours, special colours upon request or stainless steel model in K400 or K800

Options


Rechargeable battery emergency descent
Radio operation
Folding seat
Emergency call: Simple or via emergency phone
Acoustic signal and/or optical signal during movement
Door and landing covering in glass, aluminium sheet or perforated aluminium sheet coated to customer's wishes
Various access control systems (Fingerprint)

GB50 Large Capacity Step Through 2-Stop Vertical Platform

To transport larger loads – up to 2,000kg - our GB50 platform lift uses a hydraulic scissor drive system to move between floors. As a result, this product requires a small external controller / hydraulic tank unit to be fitted close by. Operation is by constant pressure buttons on the platform and on both landings. Our standard models come with set platform dimensions, car and entrances supplied in powder-coated aluminium (in a variety of colours) and manually operated gates. A wide range of options for the GB50 enables user to design a more individual bespoke solution.

The GB50 is also available as an enclosed model, encompassing a full height (2000mm) door at lower level (that does NOT travel with the platform) and matching side panels to extend to the full height of the travel plus upper (1100mm) entrance.

Manufactured to comply with the EC Machinery Directive 2006/42/EC.

Standard Specification


Capacity
2,000kg
Speed
0.10 m/s with soft start and stop
Maximum Travel
2m
Minimum Pit
Varies with Travel required
(e.g. 200mm if travel is 900mm / 400mm if travel is 1800mm)
Standard Platform Size (width x depth)
1100mm x 1400mm
Drive
Hydraulic scissor mechanism with bellows protection
Power Requirement
410V 3 phase
Controls
Constant pressure drive buttons on the platform
Wireless lower landing call station remote to the platform lift, upper level landing station integrated into landing frame
Standard Colour
Any RAL colour

Options


Special colours
Stainless steel finishes
Automatic doors - visible or concealed
Bespoke platform dimensions
230V, 50Hz single phase power
Rechargeable battery emergency rescue device
Remote controlled operation
Emergency alarm or emergency phone
Audible and/or visual alarm during operation
Folding seat
Range of access / locking systems
Special enclosure pack (2000mm lower level door plus matching side panels) in a variety of finishes