Goods Only Lifts
Wherever goods need to be transported between floors, the BKG range of Goods Only Lifts offers the ideal answer. Each lift is tailored to meet the most exacting of requirements and each lift is built specifically to match customers’ needs.
BKG’s Goods Only Lifts range from the 300kg and 500kg capacity Bespoke Goods Lifts, to the 500kg, 750kg, 1000kg and 2000kg Goodsmovers. They come with heavy duty single or double hinged landing doors (dependent on car size) which can be complemented with either drop-bar or lattice gate protection to the car with an EN81-58 2 hour fire rated concertina shutter landing door available as an option. In most cases, the drive unit is fixed at the top of the structure with a chain drive arrangement, however in applications where low headroom is a problem, top or bottom side located drum drive variants are available.
All BKG Goods Only Lifts come with their own galvanized steel structure and are built to a standard specification. Conventional models come complete with a machine access door. Capacity, travel, speed, number of stops, car dimensions, entrance type, finishes etc can all be varied to customise the lift to match the site requirements.
300kg and 500kg Bespoke Goods Lift
All BKG Bespoke Goods Lifts come with their own galvanized steel structure and are built to a standard specification. Conventional models come complete with a machine access door. Capacity, travel, speed, number of stops, car dimensions, entrance type, finishes etc can all be varied to customize the lift to match the site requirements.
Three phase drive unit
GeneralFull set of warning notices
Single phase drive unit
ElectricalAdditional auxiliary main contractor stations complete with key isolator, car position indicator, "Lift in use" indicator and door open signal
Single or Through entry
Above (chain drive) or side of structure at the top or bottom floor (drum drive)
300kg or 500kg
Width 600mm (min) / 1000mm (max)
Depth 800mm (min) / 1000mm (max)
Height 1300mm (min) / 2000mm (max)
Width 800mm (min) / 1200mm (max)
Depth 1100mm (min) / 1500mm (max)
Height 1300mm (min) / 2000mm (max)
500kg, 750kg, 1000kg and 2000kg Goodsmover
They come complete with their own self-supporting galvanised steel structure and a galvanised steel machine access door. All Goodsmovers are powered by an overhead worm gear and chain drive arrangement, although a low headroom options are available which are driven by a side mounted rope and drum arrangement.
The galvanised steel lift car is available in two sizes as standard, although all dimensions can be varied upon request.
Self supporting galvanised steel structure designed to accept cladding
Full set of warning notices
Additional auxiliary main contactor
One side or open through entry configuration
Both lifts require a pit of 170mm and a minimum headroom of 2500mm and both come with their own structure and come complete with a single hinged landing door and an electrically interlocked drop bar on the car. The car is fitted with timber buffer rails for extra wall protection. The remainder of the lift is produced to the same specification as the BKG Bespoke Goods Lifts and both models are manufactured to comply with EN81-31:2010.
UK Pallet Lift
The UK Pallet Lift has been developed by BKG specifically for the UK market and is sized to accept 1000 x 1200mm UK style pallets. The special car size on this model is 1100mm wide x 1300mm deep and this requires a shaft of 1500mm wide x 1420mm deep.
Euro Pallet Lift
The Euro Pallet Lift is specifically designed to take the widely used 800mm x 1200mm Euro Pallet. The car width and depth are 1000mm x 1300mm and this lift requires a shaft of 1400mm x 1420mm
Goods with Attendant LiftsThis lift range is a variation on the basic Goodsmover Lift and allows the goods being moved to be accompanied by a single trained operativeA push station is fitted in the car which becomes active on the action of a keyswitch. The pushes are hold-to-run type and protection is given to the passenger through the use of a safety edge on the open side of the carThe car height is 2000mm and comes fitted as standard with a light and integrated emergency lighting. All other specification features and options are the same as the basic Goodsmover range
Goods-Passenger LiftThe Shorts ML Range is a family of hydraulic Passenger and Goods-Passenger Lifts which are suitable for buildings with lift shafts that have reduced free spaces.Using components from some of Europe’s leading manufacturers together with a unique sling design, the ML range provides UK and Irish Lift companies with a high quality solution to an increasingly common regulatory problem.The ML Range consists of 8 lifts ranging in capacity from 225 to 1600kg that can be installed in shafts with pits as shallow as 150mm and headrooms as low as 2500mm. They are designed to comply with either the Lift Directive (Standard EN81-21), for application in existing buildings or the Machinery Directive, for application in new buildings.